Removing Lid/Display for replacement for Dell Latitude 5470/80/90

Installation and Removal Instructions
Dell Latitude 5480 (P72G001) Display Assembly

 
Loosen base screws (Captive screws).

Step 1

  • Loosen base screws (Captive screws).
  • Use fingers to pry apart Bottom Base.
Loosen base screws (Captive screws).Use fingers to pry apart Bottom Base.Loosen base screws (Captive screws).
 
 
Unscrew and disconnect Battery (1 x

Step 2

Unscrew and disconnect Battery (1 x Unscrew and disconnect Battery (1 x Unscrew and disconnect Battery (1 x
 
 
Unscrew and disconnect WLAN Card (1 x

Step 3

Unscrew and disconnect WLAN Card (1 x Unscrew and disconnect WLAN Card (1 x Unscrew and disconnect WLAN Card (1 x Unscrew and disconnect WLAN Card (1 x
 
 
Remove screw that secures display cable (1 x M2 x 3mm).

Step 4

  • Remove screw that secures display cable (1 x M2 x 3mm).
  • Unscrew then disconnect bracket and display cable (2 x M2 x 3mm).
Remove screw that secures display cable (1 x M2 x 3mm).Unscrew then disconnect bracket and display cable (2 x M2 x 3mm).Remove screw that secures display cable (1 x M2 x 3mm).
 
 
Unscrew and disconnect Hard Drive (Captive screws).

Step 5

  • Unscrew and disconnect Hard Drive (Captive screws).
Unscrew and disconnect Hard Drive (Captive screws).Unscrew and disconnect Hard Drive (Captive screws).Unscrew and disconnect Hard Drive (Captive screws).
 
 
Remove hinge cover screws (2 x M2 x 3mm).

Step 6

  • Remove hinge cover screws (2 x M2 x 3mm).
  • Lift hinge covers from the display hinges.
Remove hinge cover screws (2 x M2 x 3mm).Lift hinge covers from the display hinges.
 
 
Remove bottom and back display assembly screws (2 x M2 x 3mm) (2 x
Print Article